7 Stack Enclosure for 4x, 6x 8x BMC1S Wire-to-Wire/Panel configurations (Sealed) Stack Enclosures for 6x BMC1S Half-Shell Wire-to-Wire/Board Configurations (Sealed) 4BMCWPS-F-SET-BK Stack Enclosure 4x BMC1S (Sealed) ♀ 4BMCWPS-M-SET-BK Stack Enclosure 4x BMC1S (Sealed) ♂ 6BMCWPS-F-SET-BK Stack Enclosure 6x BMC1S (Sealed) ♀ 6BMCWPS-M-SET-BK Stack Enclosure 6x BMC1S (Sealed) ♂ 8BMCWPS-F-SET-BK Stack Enclosure 8x BMC1S (Sealed) ♀ 8BMCWPS-M-SET-BK Stack Enclosure 8x BMC1S (Sealed) ♂ Stack Enclosure for 4x,6x & 8x BMC1S Wire-to-Wire / Panel Configurations (Sealed) Optional Lock-pin locks BMC1S stack together and prevents misalignment. See Table Specifications for 1-Pole BMC (BMC1S) Housing and Contacts options. Figure 3 Stack Enclosure for 4x, 6x, and 8x BMC1S provides a durable chemical & heat resistant housing for wire-to-wire/panel configurations. 8BMCWPS-M-SET-BK 8BMCWPS-F-SET-BK Stack Enclosures for 6x BMC1S Half-shell Wire-to-Wire/Board Configurations Front-side seal on the male stack enclosure ensures a positive seal with the female stack enclosure when the 4x, 6x, and 8x Single-Pole stack is fully mated and connected. Stack enclosures are panel-mountable and not intended for screwing together. Figure 4 Stack Enclosure for 6x BMC1S provides a durable chemical & heat resistant housing for wire-to-wire/board configurations. See Table Specifications for Single-Pole BMC1S Housing and Contact options. 6BMCSBTBL-FH-BK Stack Enclosure 6x BMC1S Half-shell (Unsealed) 6BMCSBTBL-MH-BK Stack Enclosure 6x BMC1S Half-shell w/ Mounted M3s (Unsealed) Unsealed half-shell stack enclosures have locking slots and snap together around a mated stack of 6x BCM1S. These chemical and heat resistant stack enclosures provide strain relief and prevent accidental disconnects. These solutions come with and without mounted M3 screws. 6BMCSBTBL-MH-BK 6BMCSBTBL-FH-BK
RkJQdWJsaXNoZXIy ODM5NzM=